Gladius G1220, User Manual

Page: 76 / 113

- 60 -
Use the Computer
3.7.3. Charge Batteries
To use the desktop cradle to charge the batteries installed on the computer:
1. Install one or both batteries to the computer.
2. Connect the desktop cradle to power supply.
power outlet
power cable
power adapter
cradle
The cradle’s power status LED then lights green to signify that power is connected.
3. Seat the computer into the desktop cradle as described in 3.7.2. Seat/Dismount the
Computer on page 58 .
Seat the
computer.
The computer's battery charging status LED
and/or
then lights orange
to signify the batteries are being charged. Normally it takes 4 hours to charge the
battery to full.
When the charging finishes, the said status LED light green to signify the battery is
fully charged. See also Status LED on page 12 to monitor the computer's battery
charging.