![background image](http://html1.mh-extra.com/html/gima/rescue-life/rescue-life_user-manual_2228086069.webp)
Distributed by
Rescue Life - User Manual Rev. 3.1
63
To replace the paper, push the green button and open the printer cover. Insert a new
paper roll with the thermo-sensible side up and then close the cover. Push the
FEED
key (on the printer panel) until the paper comes out straight.
To print all the traces of ECG signal start printing after selecting the leads I, II, III.
While print is in progress enter the menu and select the successive derivations, aVR,
aVL, aVF. Repeat until you have printed all leads. Then stop printing.
AUTO TEST
RESCUE LIFE is equipped with internal auto test that checks the correct functioning of
the device.
It is advisable to do the test at least once a week. It 'also possible to print the report.
On the initial screen, press the function key
TEST - F3
to access the test screen.
Press
START – F1
key to start auto test. RESCUE LIFE will do internal tests and will
show results.