![background image](http://html1.mh-extra.com/html/gima/rescue-life/rescue-life_user-manual_2228086030.webp)
Distributed by
Rescue Life - User Manual Rev. 3.1
24
SPO
2
DATA
(optional): when the SpO
2
sensor is connected, it indicates the oxygen
saturation and the heart rate acquired.
NIBP
DATA
(optional): when the NIBP cuff is connected, it indicates the non-invasive
blood pressure.
ECG DATA
: it shown signal gain and speed and the operating mode (MONITOR -
DIAGNOSTIC).
Using functional keys it is possible to manage some function.
DISARM
–
F1
: It allows to discharge the capacitor internally once it has been
charged.
PRINT – F2
: it allows to start and stop printing.
PACER – F3
: it allows to enter in Pacemaker screen (optional).
SYNC – F4
: it allows to activate and deactivate sync mode.
MENU – F5
: it allows to open menu.
SET-UP MENU
The START-UP menu is accessible pressing the F5 key (MENU) or the Speed Dial on the
operational screen and all the values can be changed using the Speed Dial.
Pressing the Speed Dial will select the field to change and rotating the Speed Dial will
change the field value.
The entered values can be stored (when the ‘SAVE SETUP’) is selected and will be used
as default values when RESCUE LIFE is switched on.
If the user needs to change the values only for the actual session then after changing
the desired values should exit the start-up menu pressing the F5 key (MENU).