Generation II RF Control System – Operating, Installation & Technical Manual
RF Gen II System Technical Manual Rev02_12_10
21
Checking Setup Parameters
A Function screen is available to check current settings. To enter, press and hold the left
arrow for three or more seconds.
The top line shows the requested valve position.
The second line shows the present gross load weight.
The third line shows the current machine ground speed.
The bottom line of the screen shows the current mode of operation (Std), the
Controller software revision and connectivity status.
The Function mode screen is shown below:
By pressing the UP or DOWN buttons, you can scroll and view parameters. They cannot be
changed here.
Press GO or STOP to exit and return to the operating screen.
VALVE:
38%
GROSS:
2850kg
SPEED:
5.65km/h
MODE:Std Rev 3.5
Requested valve position
Gross weight
Ground speed
Controller software revision
Current operating mode
