Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetPak/MetPak RG and MetPak Pro Base Stations
Page | 94
Issue 1
Doc. No. 1723-PS-0023
October 2018
8.
MAINTENANCE & FAULT-FINDING
8.1.
Cleaning and Handling
Ideally when installing the unit handle with lint free gloves and degrease the unit to reduce the
build-up of deposits.
8.2.
Servicing
There are in general no moving parts requiring routine maintenance.
In the event of failure, prior to returning the unit to your authorised Gill distributor, it is
recommended that:
All cables and connectors are checked for continuity, bad contacts, corrosion etc.
A bench test is carried out.
Contact your supplier for advice if failure persists.
8.2.1.
Wind Sensors
If there is any build-up of deposits on the unit, it should be gently cleaned with a cloth, moistened
with soft detergent. Solvents should not be used, and care should be taken to avoid scratching
any surfaces. The unit must be allowed to defrost naturally after being exposed to snow or
icy conditions, do NOT attempt to
remove ice or snow with a tool.
There are no moving parts or user-serviceable parts requiring routine maintenance.
Opening the unit or breaking the security seal will void the warranty and the calibration.
8.2.2.
UV Radiation Shield (MetSpec)
Ideally the user should try to keep the MetPak Temperature
and Humidity housing radiation screens clean and free of
biological growth but a simple wipe with some non-
aggressive soft detergent cleaner will suffice. Solvents
should not be used, and care should be taken to avoid
scratching any surfaces. The unit must be allowed to defrost
naturally after being exposed to snow or icy conditions, do
NOT attempt to remove ice or snow with a tool.
