Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetPak/MetPak RG and MetPak Pro Base Stations
Page | 43
Issue 1
Doc. No. 1723-PS-0023
October 2018
5.4.
MetPak Base Station Range Mounting and Dimensions (in mm)
MetPak Base Stations use a mounting clamp suitable for attaching to a vertical pipe with a
diameter of 30-58mm. When mounting the Base Station, consider the position, orientation and
alignment of the unit.
Note that the mounting pipe should first be degreased and when assembling the Base Station
clamp assembly the outer clamp nuts need to be tightened evenly to a torque figure of 3 Nm.
The moving plate part of the clamp needs to be reversed for poles below 38 mm diameter.
Mounting Bracket Assembly Exploded View
Mounting Bracket Assembled View
C Holes are 8.5mm diameter
Earthing Point for
supplied
screw/washer/tag
