Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetPak/MetPak RG and MetPak Pro Base Stations
Page | 84
Issue 1
Doc. No. 1723-PS-0023
October 2018
Dew Point
Default
Settings
button
Averaging
options
Logging
button
Connection
Status
indicators (see
table below)
Firmware
Version and
Unit ID
Load
Settings
button
Save
Settings
button
Max/Min
Markers
Disconnect
button
7.1.3.
The MetView Console
MetView opens with a data-monitoring console. This consists of gauges showing: the appropriate
Base Station parameter which could include Wind Direction, Wind Speed, Pressure, Humidity,
Temperature, PRT, Analogue Input 1 and Analogue Input 2. There are also digital readouts of Dew
Point and Digital Input 1. Buttons beneath each of the gauges allow you to choose the displayed
units and other options. Each gauge also shows the maximum and minimum values recorded
during the current session. The wind speed gauge also shows the maximum gust speed.
Note: MetView will not show data if the unit is set for MODBUS or SDI-12 format.
Connection status indicators
Reading
Function
Green Background Tick
Indicates Base Station Unit logging or communicating correctly
with MetView along with reading the Base Station firmware version.
Red Background Cross
Indicates Base Station not logging or connected/communicating
to MetView.
1.00Hz
Indicates the output rate of the Base Station when connected.
Reads when the unit is communicating correctly with MetView.
Thu 16 Aug 2018 14:35:19
Real Time PC date and time indication.
Wind Direction
Wind Speed
Pressure
Humidity
Temperature
