Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetPak/MetPak RG and MetPak Pro Base Stations
Page | 29
Issue 1
Doc. No. 1723-PS-0023
October 2018
J9 Terminal 1
(AN1 and AN2
)
4.13.
Analogue, Digital and PRT Input Connections
NOTE:
MetPak Base Station -
This section is Not Applicable.
MetPak RG Base Station -
Digital input connection applicable only.
MetPak Pro Base Station -
Analogue, Digital and PRT Input connections all applicable.
Analogue 0-5 volt Input Connections AN1 and AN2
This is not a default setting; ensure the MetPak Pro Base Station has been configured for this
input requirement before wiring sensors to the Base Station.
(See picture above for Power and Communication Connections).
J8 Terminal 1
(DIG 1)
J7 Terminal 1
(PRT)
