Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetPak/MetPak RG and MetPak Pro Base Stations
Page | 55
Issue 1
Doc. No. 1723-PS-0023
October 2018
MetSet Editing Screen
When connected correctly a MetSet editing screen is available to read configuration settings,
change configuration settings, save Base Station configuration settings to a PC file location,
upload Base Station configuration settings from a PC file and view the Base Station raw data
string output.
MetSet Connection Status Information.
Reading
Function
ONLINE
ONLINE in green indicates the Base Station has been successfully
connected to MetSet.
OFFLINE in Grey indicates that MetSet is being used without a Base
Station in communication with MetSet.
19200 COM7
19200 is a report on the Base Station Baud rate setting.
COM 7 is a report on the Base Station COM Port connection number.
S/W ver 2436-4.01.01
2436 is the Base Station Firmware number.
4.01.01 is the firmware revision.
PV=4 is the Protocol Version (Gill Internal Reference).
Source:Device
MetSet reads ‘Device’ when the source of the data that MetSet has
retrieved has come from the Base Station Model.
MetSet reads ‘File’ when the source of data has come from a saved
file.
MetSet reports on the connected Base Station device (METPAK
PRO) and reads the unit Serial Number (S/N: 16110011)
Connection
Status
Source of MetSet Data
MetSet Editing Screen
MetPak Device
Setting
Options
View MetPak
Raw Data
Output String
Serial Number
Move mouse over exclamation
or question marks to
read
setting comment
Return to
opening MetSet
Screen
Model
