GILES WOG-MP-VH, Operation & Service Manual

Page: 59 / 129

48
Fryer Operation Model: WOG-MP-VH
5.01.7 Other Controller Features
x 2
To cancel a running cook cycle press the [CLEAR] key once, then press it again
to cancel -OR- press [4] to continue cooking.
5.01.6 The Computer Control Cooking Cycle - General, Continued
STIR ALARM : Sounds an audible alarm at a specific time during the cook cycle, signaling operator it is time to stir
the cooking product to help promote even cooking and prevent sticking. The feature must be enabled in USER
SETTINGS, Section 5-01.8 and the point in the cycle when alarm is to sound (STIR ALARM %) must be set. Ex: If
STIR ALARM % set at 60 , during a 10 min. cook cycle, the alarm will sound after 6 mins. have elapsed. Factory-set
default = ENABLED & STIR ALARM % = 62 . If STIR OVERRIDE is set to [FORCE] or [SKIP] for the Menu Item
selected, the STIR ALARM will act accordingly regardless of the USER SETTING .
When the cooking cycle time is complete, an alarm will sound and the message “DONE COOKING - (LEFT) (RIGHT)
or (BOTH)” is displayed. Pressing the [ALARM] key silences the alarm and the Fryer re-enters READY state, ready to
cook the next load of product.
5.01.7.1 COOL Mode
To exit COOL Mode press the [CLEAR] key, then press [<4] to exit COOL
- OR - press [CLEAR] again to continue COOL Mode.
Upon exit, the temperature setpoint will return to the previous active value and
Fryer will enter PREHEAT mode until temperature is reached.
+
COOL Mode is an energy-saving feature that changes oil temperature setpoint to a lower
valve. Use to put Fryer into an idle (standby state) during downtime periods.
To enter COOL Mode , press the [COOL] key. The temperature setpoint will be changed to the
COOL TEMP setting specified in USER SETTINGS, see Section 5-01.8, Edit User Settings .
Factory-set default = 275°F . Setting can be edited by User in the range of 200°F to 350°F .