GILES GBF Series Page 85 Operation & Service Manual Download

Page: 85 / 130

Fryer Operation

GBF Ventless Electric Fryer

GBF-35D & 50D-VH

5. Connect the provided Oil Discharge Hose

⑧

to the Discharge Coupling

⑨

by pushing the white ring in while

inserting brass hose fitting. Ensure that the connection is secure.

6. Place the discharge Wand end of hose into an appropriate hot oil disposal container

⑩

(Giles Oil Caddy is

depicted)

7. Set the Pump Diverter Valve

⑪

to the

[DISCHARGE HOSE]

position (vertical).

8. Set the Selector Switch

⑫

to the

[PUMP]

position and allow waste cooking oil to be pumped into the disposal

container. When all oil has been pumped out of the Filter Pan, return the switch to

[OFF]

9. Set Power Switch

⑬

to the

[OFF]

position.

If holding the Discharge Hose during the next step, be sure to wear thermal hand protection. Some parts of

the hose assembly can become very hot

5.05

Removing Waste Cooking Oil from Fryer - continued

Continued on Next Page

Summary of Contents for GBF Series



































































































































Search results

Summary of Contents for GBF Series

Reviews:

Related manuals for GBF Series

Brands by name

Popular brands

GILES GBF Series, Operation & Service Manual

Search results

Summary of Contents for GBF Series

Reviews:

Related manuals for GBF Series

Brands by name

Popular brands