GILES GBF Series Page 70 Operation & Service Manual Download

Page: 70 / 130

Fryer Operation

GBF Ventless Electric Fryer
GBF-35D & 50D-VH

1. To set, or change, a cooking temperature setpoint value, simply press the

Up/Down Arrow Keys

⑤

until the

desired value is shown on the Display

①

. Press no other keys and the new setpoint will automatically be saved

after three (3) seconds.

NOTE:

The setting

cannot

be changed while the

[PROCESS]

key

②

is being pressed.

2. The

Temperature Unit Indicator

light

③

indicates the temperature unit for which the controller is currently

configured.

3. The Selector Switch must be placed in the

[COOK]

position before heating elements will turn

IMPORTANT! The setting is not locked into the thermostat. Any inadvertent pressing of the arrow keys will

unintentionally change the cooking oil temperature setting.

Ensure Selector Switch is

in the

[OFF]

position

Set Power Switch to

[ON]

5.02.3

Setting the Cooking Temperature

Summary of Contents for GBF Series



































































































































Search results

Summary of Contents for GBF Series

Reviews:

Related manuals for GBF Series

Brands by name

Popular brands

GILES GBF Series, Operation & Service Manual

Search results

Summary of Contents for GBF Series

Reviews:

Related manuals for GBF Series

Brands by name

Popular brands