GILES GBF Series, Operation & Service Manual

Page: 72 / 130

60
Fryer Operation
GBF Ventless Electric Fryer
GBF-35D & 50D-VH
1. Be sure that the Selector Switch
①
is in the centered [OFF] position.
2. Standard Unit:
• Place the Power Switch
②
in the [ON] position; the green Power Light
③
will turn ON .
• The Hood fan will turn ON . EAC Filter ON Light
④
should turn ON ... this is the only one of these LED lights
that should turn ON.
• Digital Thermostat
⑤
displays the current temperature setpoint.
• DO NOT place Selector Switch
①
in [COOK] position unless the fryer vat is filled with cooking oil, see
Section 5.03, Cooking Procedures .
3. Unit with ILS Option:
• Place the Power Switch
②
in the [ON] position ... nothing should happen.
• Press and hold the PUSH-TO-START Button
⑥
for about a few seconds.
• The process is then same as above.
3. After the cooking oil reaches setpoint, the Fryer is ready for cooking, see Section 5.03, Cooking Procedures .
2
1
5
3
6 4
Be certain that all Hood Filters are properly installed, and that the Filter Access Cover is in
place and securely latched before attempting to power-up the appliance.
NOTE:
The appliance will NOT power-up if the Filter Access Cover is missing or ajar. The sides of
the Cover must seat flush against the Hood front and the pin on the right-hand edge must
engage the interlock switch inside the Hood wall.
5.02.5 Power Up Procedure - Manual Controls