GILES GBF Series, Operation & Service Manual

Page: 42 / 130

30
Pre-Operation
GBF Ventless Electric Fryer
GBF-35D & 50D-VH
Ensure Fryer Control Panel switches and Lower Cabinet valves are set as follows before proceeding to each test. Setting
is the same for Manual Control.
Before attempting to perform this Fryer checkout, please refer to Section 3 and become familiar with the various
controls and their function. After you have read and fully understand the information, precisely follow the steps
as describe below to avoid possible equipment damage or malfunction.
Giles takes pride in the quality of our workmanship. Every effort has been made to ensure that a new unit is in perfect
operating condition when received; each unit must pass rigorous quality control testing prior to shipment. To further
ensure that the unit operates to expectations, it is recommended that, after installation is complete, a brief functionality
checkout be performed prior to using it for the first time.
1. Power Switch ① is in the [OFF] position.
2. Selector (Cook) Switch ② is in the [OFF] position
1 2
4. Pre-Operation Procedure
4.01 Set-up for Initial Checkout
IMPORTANT! Before beginning these tests, be sure that all of the Hood Filters are in place and properly seated,
and that the Filter Access Cover is in place and properly latched on the Hood. Fryer wil not power-up if Cover is
missing or ajar ... missing or mis-aligned filters will cause errors/alarms and which will prevent some Fryer
systems from operating.
Continued on Next Page