GILES EOF-20 Operation & Service Manual Download Page 81

Page: 81 / 113

Fryer Operation

EOF 10-10/20

5-04.

Removal of Waste Cooking Oil from Fryer - Continued

When performing the next steps be sure to wear thermal

protective gear, such as oven mitts. Some parts of the

Discharge Hose assembly and coupling will become very

hot

11. Place the Power Switch

⑬

in the

OFF

position.

14. Remove the Discharge Hose from the Discharge Hose

Coupling and drain any remaining oil into the waste oil

Disposal Container.

15. Allow the Filter Pan to cool. Remove and thoroughly

clean the Filter Pan and Filter Pan Cover.

16. To perform a Boil Out on the unit see

Section 6-01, Boil

Out Procedure

To shut down the unit see

Section 5-06, Normal

Shut-Down

12. Push the Drain Valve Handle

⑭

to the

CLOSED

position, tuck tab behind panel.

13. Place the Pump Discharge Valve Handle

⑮

, inside the

right-hand Cabinet, in the

TO FRYER VATS

position.

EOF-20

EOF-10-10

Summary of Contents for EOF-20


















































































































Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands

GILES EOF-20, Operation & Service Manual

Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands