GILES EOF-20 Operation & Service Manual Download Page 80

Page: 80 / 113

Fryer Operation

EOF 10-10/20

5-04. Removal of Liquid Shortening (Continued from previous page)

If holding the Discharge Hose during the next step, be sure the wear thermal hand protection mitts. Some

parts of the hose assembly can become very hot

6. Connect the supplied Oil Discharge Hose

⑧

to the Discharge Hose Coupling

⑨

7. Place the discharge end into an appropriate hot waste oil Disposal Container

⑩

(Giles Oil Caddy is shown)

8. Place the Pump Discharge Valve Handle

⑪,

inside the right-hand Cabinet, in the

TO DISCHARGE HOSE

position.

9. Place the Pump Switch

⑫

in the

position. Allow the pump to run until all liquid shortening has been pump

into the waste oil Disposal Container.

10. After all the used oil has been removed from the Filter Pan, return Pump Switch to the

OFF

position.

Continued on Next Page

Summary of Contents for EOF-20


















































































































Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands

GILES EOF-20, Operation & Service Manual

Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands