GILES EOF-20 Operation & Service Manual Download Page 32

Page: 32 / 113

Overview

EOF 10-10/20

3-05.

Lower Cabinet, EOF10-10 (Left-Side)

Item

Description

Function

Drain Valve Handle

Opens and closes the cook vat Drain Valve. Always be sure the

valve is fully

CLOSED

(tab on handle hooked through panel opening)

prior to adding cooking oil, or boil out solution.

The Fryer will not

heat if the Drain Valve is not completely closed!

Even though safety interlocks are built in,

always be sure the Heat Switch on Control

Panel is in the OFF position before opening this valve.

Failure to do this could result in fire, causing serious injury,

even death, damage to equipment or property, and void the

warranty.

NEVER drain oil from more than one (1)

Fryer at a time into the Filter Pan. Doing

so will cause the Filter Pan to OVERFLOW! Always pump oil

from Filter Pan back to Fryer vat or to an oil disposal

container before draining oil from another vat.

Oil Return Valve Handle

When in the

VAT FILL

position, oil is pumped from the Filter Pan

back to the Fry Vat, during the filtering process.

Summary of Contents for EOF-20


















































































































Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands

GILES EOF-20, Operation & Service Manual

Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands