GILES EOF-20 Operation & Service Manual Download Page 73

Page: 73 / 113

Fryer Operation

EOF 20/20

10. Check the oil level, it should now be at the

FULL

Mark

⑪

. Add shortening if

needed and stir in. If the

HEAT

light turns

after adding additional oil,

continue stirring until it turns

OFF

again before cooking.

11. Place the Fry Screen

⑫

into vat with the handles to the side.

12. If Basket Lift option is installed, place the Cooking Baskets

⑬

onto

the Basket Carriers

⑭

, otherwise hang baskets on Hanger Bars.

5-02.

Cooking Procedure - Continued

NOTE: Basket Lift Models:

If not desiring to use the Basket Lifts, move Lifts to the

position and

use the Basket Carrier as a hanger.

During cooking operations, oil level MUST be maintained above the indicated minimum (ADD) level. If not

maintained above that level the heating elements may shutdown.

Continued on Next Page

Summary of Contents for EOF-20


















































































































Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands

GILES EOF-20, Operation & Service Manual

Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands