GILES EOF-20 Operation & Service Manual Download Page 63

Page: 63 / 113

Fryer Operation

EOF 10-10/20

5-01.6

Cooking Cycle, General Overview - Continued

The temperature

SETPOINT

MENU NAME

, and

COOKING TIME

currently

selected are shown on the

OLED Display

of each Vat.

When in

READY

state the Temperature setpoint is shown on

7-Segment Display

of each Vat. The

READY

message indicates that the cooking oil is at proper

temperature and the Vat is ready for cooking.

To start the cook cycle press the

START

key once.

Prompt is displayed on each side for selecting which Vat to start

After selecting Vat, the Controller enters

COOK

state. If the Fryer is equipped

with automatic Basket Lifts, the Basket will be lowered into the cooking oil and

the programmed Menu Cooking Time will begin counting down on the

Segment Display

of that Vat

The

OLED Display

shows that the Vat is

COOKING

as well as displaying the programmed setpoint temperature. The Vat

Timer

Indicator

is illuminated.

The other Vat Timer can be stated if desired. To start the cook cycle press the

{START]

key once.

Prompt is displayed on the idle side display to select the other Vat. Pressing the

appropriate arrow key

[4]

[6]

will start Timer.

7-Segment Display

of that Vat

begins countdown.

EOF10-10, DUAL DISPLAY

Continued on Next Page

Summary of Contents for EOF-20


















































































































Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands

GILES EOF-20, Operation & Service Manual

Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands