GILES EOF-20 Operation & Service Manual Download Page 50

Page: 50 / 113

Fryer Operation

EOF 10-10/20

MENU Key

: An action key which is pressed in combination with other keys to access programmed

Menu Item presets. Fifty (50) Menu Presets are factory-programmed in the Controller.

ALARM Reset Key

: Pressing this key silences the Controller alarm and acknowledges certain status

messages.

CLOCK Key

: Press this key to begin manually setting a cooking time (mm:ss).

Press this key during preheat to enter the

BOIL OUT

mode. Temperature setpoint and time

changes to the

BOIL TEMP

and

BOIL OUT TIME

as specified in

USER SETTINGS (see Section 5-01.7,

Access & Edit User Settings) ... default = 200°F & 30 minutes

OLED Display

: Displays menu preset information, certain Fryer status

information, and operational instruction messages. Two (2) on Dual Display.

BASKET Key

: Pressing this key activates the

UP/DOWN [2] - [8]

keys to manually operate Fryer

Basket Lifts. The key is disabled during

PREHEAT

to prevent user from lowering basket into cooking

oil that is not yet at cooking temperature. Key is

ONLY

active if Basket Lifts are installed in the unit.

EDIT Key

: An action key which is pressed in combination with other keys to enter edit mode for

changing or creating Menu Item preset settings.

TEMP Key

: Press this key to begin manually setting a cooking oil temperature setpoint. Pressing

this key twice (2x) will display the ACTUAL OIL TEMPERATURE on the 7-Segment Display for

approximately 20 seconds.

5-01.1

Keys and Functions - Continued

Press this key to enter

COOL

mode, which allows the Fryer to idle at a lower temperature during

inactive periods to save energy. Temperature setpoint changes to the

COOL TEMP

specified in

USER SETTINGS (see Section 5-01.7, Access & Edit User Settings) ... default setting = 275°F

7-Segment Display

: Displays various status information, cook cycle time countdown,

temperature, etc. Two (2) on Dual Display.

Indicators

[HEAT]

illuminates to indicate that Controller is calling for

heating elements to energize.

[LEFT/RIGHT Timer]

illuminates to

indicate the active basket timer; time shown on 7-Segment Display.

Summary of Contents for EOF-20


















































































































Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands

GILES EOF-20, Operation & Service Manual

Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands