GILES EOF-20 Operation & Service Manual Download Page 11

Page: 11 / 113

Safety

EOF 10-10/20

• Components exposed on the Control Panel surface are impact-sensitive. To avoid damage and maintain proper

operation, exercise care when working around, or using rolling carts or tables, near the appliance.

•

DO NOT

install the unit near combustible walls and materials. Failure to maintain safe distance may result in

fire.

• When cleaning the appliance:

- DO NOT

steam clean.

- DO NOT

use products containing chlorine, or other corrosive chemicals.

- DO NOT

use abrasive products, steel wool or scouring pads.

- DO NOT

use oven cleaners.

•

DO NOT

alter, add attachments, or otherwise modify this equipment!

• Failure to comply with

CAUTION

notices may result in damage to equipment or property, and void the factory

warranty.

NOTE:

• If upon receipt, the palletized unit showed any signs of damage, you should immediately inspect the appliance

and associated accessories, and notify the freight carrier of any and all damages.

• Users must comply with all appropriate state and/or local heath regulations regarding foodservice operations,

and cleaning and sanitization of foodservice equipment.

• To ensure compliance with applicable building, health and fire codes, it is advisable that this appliance be

installed by a professional kitchen equipment contactor, or service company. All costs for installation, including

materials, labor and fees, are the responsibility of the customer.

Summary of Contents for EOF-20


















































































































Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands

GILES EOF-20, Operation & Service Manual

Search results

Summary of Contents for EOF-20

Reviews:

Related manuals for EOF-20

Brands by name

Popular brands