HD2010UC
- 30 -
V4.2
THE RECORD FUNCTION
The
REC
key supervises the function of recording data on the instrument memory.
Two recording modes are available: the
single (manual or automatic)
and
continuous
recording
.
The automatic (Auto-Store) and continuous recording modes are available
with the “Advanced Data Logger” option”.
MANUAL
AND
AUTOMATIC
SINGLE
RECORDING
When only the REC key is pressed
for at least 2 seconds
, the displayed screen will be record-
ed as a
single record
. When you press REC and before the instrument stores the active screen, you
will be asked to confirm the recording title containing order date and number. This operation can be
performed in RUN, HOLD, PAUSE and STOP modes. With the “Advanced Data Logger” option,
when the single recording is activated while the instrument is in STOP mode, you will be first asked
to choose between automatic and manual storage.
If the
manual
recording has been selected, the instrument will behave as per the above description
(Single record recording).
If, on the contrary, the
automatic
recording mode “AUTO” (“Advanced Data Logger” required)
has been selected, the sound level meter is set for Auto-Store mode. The parameter “MENU >> Re-
cording >> Auto-Store” will be activated and the REC symbol blinks over the status indicator.
Press START to begin automatic recording: as soon as the measurement time reaches the set
integration time, the parameters shown on the SLM screen are recorded automatically. If the inte-
gration mode is
single
, the acquisition will be stopped. If it is
multiple
, on the SLM a new integra-
tion and recording cycle will start automatically after all parameters are reset.
Press REC while the instrument is in STOP mode, to disable the Auto-Store function and
jump back to the continuous integration mode.
The automatic recording can be also activated from the corresponding menu item (MENU >> Re-
cording >> Auto-Store).
If the Auto-Store function is enabled in single integration mode, the parameters displayed on
the SLM screen will be stored when the set integration time is over. Then the capture will be auto-
matically stopped.
When the parameter “MENU >> General >> Measurement >> Integr.Mode” is set to MULT
mode (the symbol “Tint” in the SLM screen starts to blink), then the acquisition is repeated over
time intervals corresponding to the set integration time; each time interval is automatically preced-
Summary of Contents for DeltaOHM HD2010UC
Page 2: ...HD2010UC 2 V4 2 ...
Page 129: ...HD2010UC 129 V4 2 NOTES ...
Page 130: ...HD2010UC 130 V4 2 NOTES ...
Page 131: ......
