HD2010UC
- 97 -
V4.2
ENTER key
The ENTER key confirms the selected parameter. When setting parameters from the menu, to quit
setting without saving a parameter, just press any key except
SELECT, ENTER
and the four ar-
rows
, or press MENU. Factory setup is loaded into the sound level meter by turning it on while
holding the
ENTER
key.
RIGHT key
The RIGHT key selects the next character in the active line of the menu. It jumps to the next pa-
rameter during the selection of a measuring variable that needs the definition of more than one pa-
rameter (see SELECT).
DOWN key
The DOWN key selects the next line in the menus or decreases the selected parameter.
CURSOR (Keypad)
It activates the cursors in a graph. Press it repeatedly to activate in sequence: the first cursor L1, the
second one L2 or both of them in
“tracking” (ΔL). To disable the cursors, press the key again.
Use the LEFT and RIGHT key of the keypad to move the flashing selected cursor over the graph.
Relevant values are shown at the top of the display.
LEFT (Keypad)
The LEFT key moves leftwards the cursor or the two active cursors (flashing).
Summary of Contents for DeltaOHM HD2010UC
Page 2: ...HD2010UC 2 V4 2 ...
Page 129: ...HD2010UC 129 V4 2 NOTES ...
Page 130: ...HD2010UC 130 V4 2 NOTES ...
Page 131: ......
