GHM DeltaOHM HD2010UC, Operating Manual

Page: 65 / 134

HD2010UC
- 65 -
V4.2
The following table lists the STT:RECORDER commands.
Command Format Description
ON D1 Starts the Record function
OFF D1 Terminates the Record function
AUTO D1 Enables the Auto-Store function
STT:MONITOR:? and STT:RECORDER:? commands provide information on the monitor and re-
cording status as shown in the following example.
STT:REC:?
STT:RECORDER:Measurement:SLM:OFF
DMP G
ROUP
(DUMP)
The table below features the list of the DMP group commands (DUMP).
Comando Formato Descrizione
ON E1 Starts memory dump
OFF E1 Ends memory dump
NEXT_RECORD E1 Requires the transmission of the next record
RECORD E1 Requires the transmission of the current record
CLEAR E1 Clears memory
Data download sequence is:
•
DMP:ON\r\n
The heading ending in the string “MEMORY DUMP\r\n” is printed if there are any data on
memory
•
DMP:RECORD\r\n
Prints the previous record in binary format
•
DMP:NEXT_RECORD\r\n
Prints the current record in binary format. If this is the last record, it prints the string “END
OF DUMP\r\n”
•
DMP:CLEAR\r\n (optional)
Clears memory
•
DMP:OFF\r\n
Ends data dump
Data dump can be interrupted through the sequences:
•
DMP:OFF\r\n
Ends data dump