4 Safety information
Instruction Manual BCF Plus
(11.15) BCF Plus_BA_04
6
Be careful not to incur injury from:
sharp
edges
sudden closure of the heating station and / or clamping station
falling, improperly clamped piping components
unfastened machine base on the working table
accessories lying around in the safety area of the working table during the
fusion process
Disconnect from the mains before any cleaning or maintenance work.
Immediately report any inconsistencies in the operational condition of the
machine to the persons responsible.
4.4
Safety devices and safety guards
Operate the BCF Plus only if all safety devices and safety guards are fitted and
operable.
The ON/OFF switch is on the back of the machine on the left side.
Position
0:
OFF
Position
1:
ON
The Safety lever is always to be removed after starting the fusion
process
because of the danger of inadvertent opening of the heating
station, and the associated possible withdrawal from hot and melted plastic.
The locking mechanism on the drawer prevents the drawer from opening
during transport.
Recycling
Shavings and plastic remainders are to be recycled correctly.
During the disposal of the machine it is to be made certain that the inserted
storage battery is being disposed according to the local recycling regulations.
Further safety regulations
All current safety and accident prevention regulations.
National regulations, standards and directives.
George Fischer will assume no liability for damage and interruption to
operation resulting from non-observance of this Instruction Manual.
Note
WARNING
WARNING
