4 Safety information
Instruction Manual BCF Plus
(11.15) BCF Plus_BA_04
4
4 Safety
information
The BCF Plus fusion jointing machine is a state-of-the-art machine. The
machine may cause risks and danger if it is used
improperly
or
not for its
intended purpose
by untrained personal.
Consequently:
Every person
working with the BCF Plus fusion jointing machine must
have read the
complete Instruction Manual
in particular
have read and
understood
this chapter and set up the BCF Plus fusion jointing machine
accordingly.
Keep the Instruction Manual ready at hand in the mobile working table of
the BCF Plus fusion jointing machine.
Use the machine only if it is in technically perfect condition. Faults and
malfunctions which could impair safety must be remedied immediately.
Ensure that only
trained personnel
work on the BCF Plus fusion jointing
machine.
Check, at regular intervals, that those working on the machine keep in mind
both safety and the risks involved.
Servicing and repairs
Only technical staff of George Fischer may
open the BCF Plus fusion jointing machine.
set the fusion parameters.
repair the BCF Plus fusion jointing machine.
Use only George Fischer spare parts and accessories.
We wish to explicitly point out that spare parts and accessories not delivered
by us have also not been tested and released by us. Installing and / or using
such pro-ducts, can under certain circumstances, change the constructive
standard characteristics of the BCF Plus fusion jointing machine. The result
can negatively influence active and / or passive safety features. In such cases,
George Fischer will not be held liable nor provide warranty coverage for any
injuries and damages resulting from such installation and use.
4.1
Other Related Documents
Safety Data Sheets for PVDF material
Declaration
of
Conformity
These documents are stored in the drawers of the machine or are available via
the agency of GF Piping Systems.
ATTENTION
