Gestetner P7245, Hardware Manual

Page: 77 / 553

Paper and Other Media
66
5
•
The size is supported, but it should be set as a custom size using the control
panel.
The supported size may differ depending on the printer language you use.
Set as a custom size setting using the control panel.
Tray 1/2 or the Paper Feed Unit (Tray 3/4) do not support custom size.
The following sizes are supported:
• Bypass Tray: approximately 3.94 ”-11.70 ” in width, and 5.83 ”- 23.62 ”
in length.
•
The size is not supported.
❖
Paper weight and number of sheets to be set
Check that the top of the stack is not higher than the limit mark inside the
tray.
Supported paper weight
Maximum number of
sheets (plain paper)
Tray 1/2
64 - 105 g/m
2
(20 - 28 lb.) 550 (80 g/m
2
, 20 lb.)
Bypass Tray
52 - 163 g/m
2
(16 - 44 lb.) 100 (80 g/m
2
, 20 lb.)
Paper Feed Unit (Tray 3/4)
60 - 105 g/m
2
(16 - 28 lb.) 550 (80 g/m
2
, 20 lb.)