Gestetner P7245, Hardware Manual

Page: 260 / 553

Sample Print
91
3
E
Press the
{
q
Enter
}
key.
The “To print, press Escape 3 times” message appears. Then the file selection
screen reappears.
F
Press the
{
On Line
}
key.
The initial screen appears.
Note
❒
When printing is completed, the stored file will be deleted.
❒
When multiple files are selected without setting a quantity, one set less
than the minimum number of all settings is applied. If the least number of
settings is one set, all selected files will be printed at one set.
❒
When the number of set quantity is changed, the changed quantity is ap-
plied to all selected files.
❒
To stop printing after printing has started, press the
{
Job Reset
}
key. The
file will be deleted.
Deleting Sample Print Files
If you are not satisfied with the sample printout, you can delete the Sample Print
file, revise it and print it again until the settings are suitable.
Deleting a selected Sample Print file only
A
Press the
{
Menu
}
key.
The
[ Menu ]
screen appears.
B
Press the
{U}
or
{T}
key to display [ Sample Print ] , and then press
{
q
Enter
}
key.
C
Press the
{U}
or
{T}
key to display [ Delete One File ] , and then press
{
q
Enter
}
key.
The file name and the time when the job was stored appear.
Depending on the security settings, certain print jobs may not be displayed.
D
Press the
{U}
or
{T}
key to display the file you want to delete, and then
press
{
q
Enter
}
key.
To cancel deleting a Sample Print file, press the
{
Escape
}
key.
E
Press Check the file you want to delete is displayed, and then press the
{
q
Enter
}
key.
The selected file is deleted.
F
Press the
{
On Line
}
key.
The initial screen appears.