Gestetner P7245, Hardware Manual

Page: 305 / 553

Making Printer Settings Using the Control Panel
136
4
❖
Auto Continue
You can make the Auto Continue setting. When set to on, printing continues
after a system error occurs.
• Off
• Immediate
• 1 minute
• 5 minutes
• 10 minutes
• 15 minutes
Note
❒
Default: Off
❒
If you set Auto Continue to On, a job might be cancelled if an error occurs
while it is printing out. When a job is cancelled due to error, the printer au-
tomatically begins the next job in the queue.
❖
Memory Overflow
You can specify whether or not to print a memory overflow error report.
• Do not print
• Error Info.
Note
❒
Default: Do not print
❖
Copies
You can specify the number of pages to print.
This setting is disabled if the number of pages to print is specified by com-
mand or the printer driver.
• 1-999
❖
Printer Lang.
You can specify the printer language.
• Auto Detect
• PCL
• PS
• PDF
Note
❒
Default: Auto Detect
❖
Sub Paper Size
You can select [ Off ] or [ Auto ] to enable the Sub Paper Size function. When you
select
[ Auto ]
, the printer uses an alternative paper size if the currently speci-
fied paper is not loaded. When you select [ Off ] , the printer uses any size paper
in the current specified paper tray.
• Auto
• Off