Gestetner P7245, Hardware Manual

Page: 430 / 553

Mac OS
261
8
F
Double-click the [ ScreenFonts ] folder.
G
Double-click the [ TrueType ] or [ Type1 ] folder.
Select the font type you want to use.
H
Copy the fonts you want to install in [ Fonts ] under [ System Folder ] .
A confirmation message appears.
I
Click [ OK ] .
The fonts are installed.
J
Restart the Mac OS.
Changing to EtherTalk
Follow the procedure below to configure to a Mac OS to use EtherTalk.
A
Open [ Control Panel ] , and then double-click the AppleTalk icon.
B
On the [ Connect via: ] pop-up menu, click [ Ethernet ] .
C
If you change zones, select a name on the [ OK ] pop-up menu.
D
Close the AppleTalk control panel.
E
Restart the computer.
Note
❒
The procedures used to configure Mac OS may vary depending on the Mac
OS version. The following describes how to configure Mac OS 9.1. If you
are using a different version of Mac OS, use the following procedures as a
reference and see the manuals for your Mac OS version.
❒
Confirm the Connection to the Printer with TCP/IP.
Reference
For information about installing applications required for EtherTalk, see
the Mac OS manuals.