66
[Audio In Source]
Note this function is only available in
GV-PTZ010D
which contain a built-in microphone and also allow you to install an external
microphone.
Built-in Microphone:
Enable the built-in microphone to record
sounds. By default the option is enabled.
External Microphone:
Enable the externally connected microphone
to record sounds.
[TV Out]
Note this function is only available for the camera with TV-out
connector. Select the signal format of the Video Output on the camera as
either NTSC or PAL.
[Audio Settings] Enable Noise Reduction
to reduce the background
noise in the audio file. All H.265 cameras applying firmware V1.02 or later
support this function.
[LED Control]
Note this function is not available for
GV-PTZ010D
.
Ready LED:
Select
Disable
if you do not wish to use the Status LED.
LAN LED, WAN LED, Monitoring LED:
Note this option is only
available in
Advanced Cube Camera
. Select
Disable
if you do not
wish to use the LEDs. For details on LED status, see
Overview
in the
corresponding
Hardware Manual
.
Alarm LED:
Sets the
white illumination LED
in
Advanced Cube
Camera
.
The LED is enabled by default.
Auto:
Select
Auto
for the white illumination LED to illuminate the
scene automatically when the PIR sensor detects any motion
within 5 meters.
Summary of Contents for GV-PTZ010D
