GeoVision GV-PTZ010D Firmware Manual Download Page 186

Page: 186 / 257

Administrator Mode

165

[Host Settings]

Enter a descriptive name for the camera.

[Auto Reboot Setup]

Select

Enable

to activate automatic reboot and

specify the time for reboot in the sub fields.

Day Interval:

Type the day interval between each reboot.

Reboot Time:

Use the drop-down lists to specify the time for

automatic reboot.

[Repair Record Database]

Note this function is not available for

Target

Series

. Click

Apply

to repair the database when errors occur while playing

back the recordings with the Remote ViewLog player. Problems can occur
when there are errors in firmware or damages to the micro SD card.

[Database Status]

Note this function is not available for

Target Series

Displays the repairing status of database.

[Firmware Update]

This field displays the firmware version of the camera.

[System Settings]

Load Default:

Clicking the

Load Default

button to restore factory

default settings. After applying the default settings configure the
camera’s network setting again.

Load Default Without Network:

Clicking the

Load Default without

Network

button to restore factory default settings without changing

the camera’s network settings.

[Temperature Status]

Note this function is not available for

Target Series

(except for GV-EFD2101/3101/5101, GV-EVD2100/3100/5100 and GV-
EBL5101),

Cube Camera

and

Advanced Cube Camera

. Displays the

current chipset temperature inside the camera.

Summary of Contents for GV-PTZ010D


































































































































































































































































Search results

Summary of Contents for GV-PTZ010D

Reviews:

GeoVision GV-PTZ010D, Firmware Manual, Page: 186 / 257

Search results

Summary of Contents for GV-PTZ010D

Reviews: