32
Wide Dynamic Range:
adjusts and generates clear live view when
the scene contains very bright and very dark areas at the same time.
Select
Auto (Strong)
to bring out details of the dark areas of the
scene, select
Auto (Weak)
to bring out fewer details of the dark
areas and at the same time keep the bright areas from overexposure,
or select
Auto (Normal)
for a balanced effect. Select
Close
to
disable the function.
Defog:
Select
Auto
to automatically enhance the visibility of images.
Select
Close
to disable the function.
Low Lux Enhancement:
Select
Auto
for the camera to
automatically enhance the live view under insufficient light. Select
Close
to disable the function. The default setting for cameras without
Super Low Lux is
Close
. The default setting for cameras with Super
Low Lux is
Auto
.
Zoom:
Click the
Zoom In
and
Zoom Out
buttons to adjust
the apparent distance of the scene. After zooming the camera, re-
focus the camera manually or automatically. For details, see
Focus
Change
and
Focus Mode
below.
Focus Change:
Click the
Focus In
and
Focus Out
buttons
to adjust the focus. To focus automatically, click the
Auto Focus
button.
Focus Mode:
Select
Normal Scan
,
Regional Scan
or
Full Scan
and then click the
Start
button to automatically adjust the
camera focus.
The
Normal Scan
mode focuses the camera the
fastest. The
Regional Scan
mode focuses the area selected on the
live view. The
Full Scan
mode performs a detailed checkup and
applies the best focus.
Day Night Focus:
Saves focus settings for day mode and night
mode. Select
Auto
to automatically focus. Select
Close
to disable
the Day Night Focus function. To configure fixed settings for day
mode and night mode, select
Manual
and follow the steps below:
Summary of Contents for GV-PTZ010D
