Administrator Mode
125
4
4
[RTSP]
Activate Link:
Enable the RTSP service.
RTSP/TCP Port:
Keep the default value 8554,
or modify it if
necessary.
RTP/UDP Port:
Keep the default range from 17300 to 17319, or
modify it if necessary. The number of ports for use is limited to 20.
Max Connection:
Select the maximum number of RTSP and 3GPP
connections to the camera. The maximum value is 8.
Enable Audio:
Note this function is not available for
Target Bullet
Camera
,
Target Mini Fixed Rugged Dome
and
Ultra Bullet Camera
.
Turns audio streaming on or off.
Disable Authentication:
By default, when accessing live view
through RTSP command, the ID and password of the camera are
required. Select this option to disable the authentication prompt.
[Streaming 1/2]
Set up the Multicast function over RTSP.
Note:
This function is only for Target cameras firmware V1.09 or later.
For details on remote monitoring with mobile phones, see
Mobile Phone
Connection, Chapter 26
. For RTSP command, see
Appendix B
.
Summary of Contents for GV-PTZ010D
