8
B. Type the Network Name (SSID) or click the
Access Point
Survey
button to search and select for the available Access
Points/wireless stations.
C. Select
Ad-Hoc
or
Infrastructure
for the Network type.
D. Select the
Authentication Type
using the drop-down list. You
can also obtain this information by clicking the
Access Point
Survey
button.
E. Type the
WPA-PSK Pre-shared Key
or
WEP
depending on the
encryption setting for the Access Point.
F. Click
Apply
to save the configuration.
Note:
1.
Your encryption settings must match those used by the Access
Points or wireless stations with which you want to associate.
2. When
Ad Hoc
is used, only
WEP
encryption is supported.
3. When you lose the wireless access, you can still access the unit by
connecting it to a LAN and using the GV IP Device Utility to search
for the device.
4. For detailed information on configuring the wireless LAN, see
4.7.2
Wireless Client Mode
.
Summary of Contents for GV-PTZ010D
