manualshive.com logo in svg

GeoVision GV-PTZ010D, Firmware Manual, Page: 2 / 257

Share
Download
GeoVision GV-PTZ010D Firmware Manual Download Page 2

 
 
 

 

 

 

 

 

 

 

 

 

© 2017 GeoVision, Inc. All rights reserved. 

Under the copyright laws, this manual may not be copied, in whole or in 
part, without the written consent of GeoVision. 
 
Every effort has been made to ensure that the information in this manual 
is accurate. GeoVision, Inc. makes no expressed or implied warranty of 
any kind and assumes no responsibility for errors or omissions. No 
liability is assumed for incidental or consequential damages arising from 
the use of the information or products contained herein. Features and 
specifications are subject to change without notice. 

Note: no memory 

card slot or local storage function for Argentina.

 

 
GeoVision, Inc. 
9F, No. 246, Sec. 1, Neihu Rd.,  
Neihu District, Taipei, Taiwan 
Tel: +886-2-8797-8377 
Fax: +886-2-8797-8335 
GeoVision

, the 

GeoVision

 logo and GV 

series products

 

are trademarks of GeoVision, Inc. 

Windows

 is the 

registered trademark of Microsoft Corporation.  

 

October 2017

Summary of Contents for GV-PTZ010D


































































































































































































































































Reviews:

No comments