GeoVision GV-PTZ010D, Firmware Manual, Page: 177 / 257

156
[Storage Settings]
„
Name: Type the name of the storage device. The name can only
contain English letters (of upper or lower cases), numerals, slashes,
and hyphens.
Note: The setting of the device name is for GV-NAS System only.
„
Enable recycling: If Enable recycling is selected, when the space of
the storage device is lower than the specified space, the system will
overwrite the oldest recorded files. If
Enable recycling is not selected,
the system will stop recording when the specified space is reached.
„
Keep days (1-254): Select the number of days to keep the files from
1 day to 254 days. When both Keep days and Enable recycling are
selected, the system applies whichever condition comes first. For
example, if the specified smallest amount of storage space comes
earlier than the designated keep days, then recycle is applied first.
„
Enable debug message to the storage: Note this function is not
supported for Target Series . Debug message (see 4.9.4 Log
Information ) is deleted after reboot. Select this option to store log
information to an inserted storage device.
„
Enable auto formatting when disk or partition is enabled to
record:
Note this function is not supported for Target Series . Select
this option for the camera to automatically format the storage device
when there is error during recording.
[Network Neighborhood Settings]
You can record to a connected NAS server.