Getting Started
11
2
2.2 Adjusting Image Clarity
Note the procedures described in this section only apply to the cameras
that allow manual focus adjustment. To adjust focus of a PTZ camera,
refer to
Focus Adjustment
in corresponding
the
Hardware Manual
; for
Cube Camera and Advanced Cube Camera, refer to Camera
Adjustment in
3.2.2 The Control Panel on the Live View Window
.
After you have connected your camera to the network, follow the steps
below to adjust image clarity.
1. Make sure you have installed the GV-IP Device Utility program
included on the
Software DVD
.
Note:
The PC installed with GV-IP Device Utility must be under the
same LAN with the camera you wish to configure.
2. On the GV-IP Utility window, click the
button to search for the
IP devices connected in the same LAN. Click the IP Address of the
camera you desire. A drop-down list appears.
Figure 2-7
Summary of Contents for GV-PTZ010D
