"Shutdown" actions described above will be taken.
St
This column shows the current state of the port as s
ate
een from the Limit Control's point of view. The
kes one of four values:
This can be shown for all actions.
an only be shown if
tdown or Trap & Shutdown.
state ta
Disabled:
Limit Control is either globally disabled or disabled on the port.
Ready:
The limit is not yet reached.
Limit Reached:
Indicates that the limit is reached on this port. This state c
Action is set to None or Trap.
Shutdown:
Indicates that the port is shut down by the Limit Control module. This state can only
be shown if Action is set to Shu
Re-open Button
If a port is shutdown by this module, you may reopen it by clicking this button, which will only be
e case. For other methods, refer to Shutdown in the Action section.
enabled if this is th
Note that clicking the reopen button causes the page to be refreshed, so non-committed changes
will be lost.
Buttons
Add New Entry:
Click to add a new community entry.
:
Click to save changes.
ert to previously saved values.
Save
Reset:
Click to undo any changes made locally and rev
72
Summary of Contents for GV-POE0812
Page 268: ...260...
