GeoVision GV-POE0812 User Manual Download Page 194

Page: 194 / 360

4.1.19.3 QoS - Port Scheduler

This page provides an overview of QoS Egress Port Schedulers for all switch
ports.

The ports belong to the currently selected stack unit, as reflected by the page
header.

Port

The logical port for the settings contained in the same row.

Click on the port number in order to configure the schedulers.

Mode

Shows the scheduling mode for this port.

Shows the weight for this queue and port.

This page allows you to configure the Scheduler and Shapers for a specific port.

The settings relate to the currently selected stack unit, as reflected by the page
header.

186

Summary of Contents for GV-POE0812









































































































































































































































































































































































Search results

Summary of Contents for GV-POE0812

Reviews:

Brands by name

Popular brands

GeoVision GV-POE0812, User Manual

Search results

Summary of Contents for GV-POE0812

Reviews:

Brands by name

Popular brands