GeoVision GV-POE0812 User Manual Download Page 238

Page: 238 / 360

4.2.4 Monitor - DHCP

CP - Server

4.2.4.1 DH

4.2.4.1.1 DHCP - Server - Statistics

This page displays the database counters and the number of DHCP messages

ent and received by DHCP server.

atabase Counters

isplay counters of various databases.

Pool

umber of pools.

xcluded IP Address

umber of excluded IP address ranges.

Declined IP Address

umber of seclined IP addresses.

inding Counters

isplay counters of various databases.

utomatic Binding

umber of bindings with network-type pools.

Manual Binding

umber of bindings that administrator assigns an IP address to a client. That is,

ool is of host type.

N
the p

Expired Binding

umber of bindings that their lease time expired or they are cleared from

Automatic/Manual type bindings.

DHCP Message Received Counters

isplay counters of DHCP messages received by DHCP server.

DISCOVER

230

Summary of Contents for GV-POE0812









































































































































































































































































































































































Search results

Summary of Contents for GV-POE0812

Reviews:

Brands by name

Popular brands

GeoVision GV-POE0812, User Manual

Search results

Summary of Contents for GV-POE0812

Reviews:

Brands by name

Popular brands