Web Management
4
1. Actual Consumption: In this mode the ports are shut down when the actual
power consumption for all ports exceeds the amount of power that the power
supply can deliver or if the actual power consumption for a given port
exceeds the reserved power for that port. The ports are shut down according
to the ports priority. If two ports have the same priority the port with the
highest port number is shut down.
2. Reserved Power: In this mode the ports are shut down when total reserved
powered exceeds the amount of power that the power supply can deliver. In
this mode the port power is not turned on if the PD requests more power than
available from the power supply.
Power Supply Configuration
Primary and Backup Power Source
Some switches support having two PoE power supplies. One is used as primary
power source, and one as backup power source. If the switch doesn't support
backup power supply only the primary power supply settings will be shown. In
case that the primary power source fails the backup power source will take over.
For being able to determine the amount of power the PD may use, it must be
defined what amount of power the primary and backup power sources can deliver.
Valid values are in the range 0 to 2000 Watts.
Port Configuration
Port
This is the logical port number for this row.
Ports that are not PoE-capable are grayed out and thus impossible to configure
PoE for.
PoE Mode
The PoE Mode represents the PoE operating mode for the port.
Disabled:
PoE disabled for the port.
PoE:
Enables PoE IEEE 802.3af (Class 4 PDs limited to 15.4W)
PoE+
: Enables PoE+ IEEE 802.3at (Class 4 PDs limited to 30W)
159
Summary of Contents for GV-POE0812
Page 268: ...260...
