manualshive.com logo in svg

GeoVision GV-POE0812, User Manual

Share
Download
GeoVision GV-POE0812 User Manual Download Page 40

 

4.1.1.5 System - Log 

 

Configure System Log on this page. 

Server Mode 

When enabled, the system log message will be sent out to the system log server you set here. The 
system log protocol is based on UDP communication and received on UDP port 514 and the system 
log server will not send acknowledgments back sender since UDP is a connectionless protocol and 
it does not provide acknowledgments. The system log packet will always send out even if the system 
log server does not exist. Possible modes are:   

 

Enabled: 

Enable server mode operation. 

 

 

Disabled: 

Disable server mode operation.

 

Server Address 

Indicates the IPv4 host address of system log server. If the switch provide DNS feature, it also can 
be a host name. 

System log Level 

Indicates what kind of message will send to system log server. Possible modes are:   

 

Info: 

Send information, warnings and errors.

   

 

Warning: 

Send warnings and errors. 

 

 

Error: 

Send errors.

 

Buttons 

 

Save: 

Click to save changes.

 

 

Reset: 

Click to undo any changes made locally and revert to previously saved values. 

 
 
 
 
 
 
 
 

 

32 

Summary of Contents for GV-POE0812









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands