Users
Each of the user modules has a column that shows whether that module has
enabled Port Security or not. A '-' means that the corresponding user module is
not enabled, whereas a letter indicates that the user module abbreviated by that
letter (see Abbr) has enabled port security.
State
Shows the current state of the port. It can take one of four values:
Disabled:
No user modules are currently using the Port Security service.
Ready:
The Port Security service is in use by at least one user module, and
is awaiting frames from unknown MAC addresses to arrive.
Limit Reached:
The Port Security service is enabled by at least the Limit
Control user module, and that module has indicated that the limit is reached
rol
and no more MAC addresses should be taken in.
Shutdown:
The Port Security service is enabled by at least the Limit Cont
user module, and that module has indicated that the limit is exceeded. No
MAC addresses can be learned on the port until it is administratively
re-opened on the Limit Control configuration Web-page.
MAC Count (Current, Limit)
The two columns indicate the number of currently learned MAC addresses
(forwarding as well as blocked) and the maximum number of MAC addresses that
can be learned on the port, respectively.
e port, the Current column will show a dash
(-).
module is not enabled on the port, the Limit column will
If no user modules are enabled on th
If the Limit Control user
show a dash (-).
Buttons
Auto-refresh:
Check this box to refresh the page automatically. Automatic
fresh occurs every 3 seconds.
re
Refresh:
Click to refresh the page immediately.
242
Summary of Contents for GV-POE0812
Page 268: ...260...
