28
a IPv6 address.
The field may be left blank if IPv6 operation on the interface is not desired.
IP Routes
Delete
Select this option to delete an existing IP route.
Network
The destination IP network or host address of this route. Valid format is dotted decimal notationor a
valid IPv6 notation. A default route can use the value 0.0.0.0or IPv6 :: notation.
Mask Length
The destination IP network or host mask, in number of bits (prefix length). It defines how much of a
network address that must match, in order to qualify for this route. Valid values are between 0 and
32 bits respectively 128 for IPv6 routes. Only a default route will have a mask length of 0 (as it will
match anything).
Gateway
The IP address of the IP gateway. Valid format is dotted decimal notationor a valid IPv6 notation.
Gateway and Network must be of the same type.
Next Hop VLAN (Only for IPv6)
The VLAN ID (VID) of the specific IPv6 interface associated with the gateway.
The given VID ranges from 1 to 4094 and will be effective only when the corresponding IPv6
interface is valid.
If the IPv6 gateway address is link-local, it must specify the next hop VLAN for the gateway.
If the IPv6 gateway address is not link-local, system ignores the next hop VLAN for the gateway.
Buttons
Add Interface:
Click to add a new IP interface. A maximum of 128 interfaces is supported.
Add Route:
Click to add a new IP route. A maximum of 32 routes is supported.
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
Summary of Contents for GV-POE0812
Page 268: ...260...
