manualshive.com logo in svg

GeoVision GV-POE0812, User Manual

Share
Download
GeoVision GV-POE0812 User Manual Download Page 120

 

Timeout 

This optional setting overrides the global timeout value. Leaving it blank will use 
the global timeout value. 

Key 

This optional setting overrides the global key. Leaving it blank will use the global 
key. 

Adding a New Server 

Click Add New Server button to add a new  server. An empty row is 
added to the table, and the  server can be configured as needed. Up to 
5 servers are supported. 

The Delete button can be used to undo the addition of the new server. 

Buttons 

 

Save

: Click to save changes. 

 

Reset

: Click to undo any changes made locally and revert to previously 

saved values. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

112 

Summary of Contents for GV-POE0812









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands