manualshive.com logo in svg

GeoVision GV-POE0812, User Manual

Share
Download
GeoVision GV-POE0812 User Manual Download Page 183

 

Web Management

 

4

from 0x00-0xff.   

b. 

PID: 

If the OUI is hexadecimal 000000, the protocol ID is the Ethernet 

type (EtherType) field value for the protocol running on top of SNAP; if 
the OUI is an OUI for a particular organization, the protocol ID is a 
value assigned by that organization to the protocol running on top of 
SNAP.  

In other words, if value of OUI field is 00-00-00 then value of PID will be etype 
(0x0600-0xffff) and if value of OUI is other than 00-00-00 then valid value of PID 
will be any value from 0x0000 to 0xffff. 

Group Name 

A valid Group Name is a unique 16-character long string for every entry which 
consists of a combination of alphabets (a-z or A-Z) and integers(0-9).   

 

Note: 

special character and underscore (_) are not allowed. 

 

Adding a New Group to VLAN mapping entry 

Click “

Add New Entry

” to add a new entry in mapping table. An empty row is 

added to the table; Frame Type, Value and the Group Name can be configured as 
needed.  

The “

Delete

” button can be used to undo the addition of new entry. The maximum 

possible Protocol to Group mappings are limited to 128. 

Buttons 

 

Save:

 Click to save changes. 

 

Reset:

 Click to undo any changes made locally and revert to previously 

saved values. 

 

Auto-refresh:

 Check this box to refresh the page automatically. Automatic 

refresh occurs every 3 seconds. 

 

Refresh:

 Click to refresh the page immediately. 

 

 

 

 

 

 

 

 

 

175

Summary of Contents for GV-POE0812









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands