Web Management
4
4.1.5.8.3 Security - Switch - RMON - Alarm
Configure RMON Alarm table on this page. The entry index key is ID.
Delete
Check to delete the entry. It will be deleted during the next save.
ID
Indicates the index of the entry. The range is from 1 to 65535.
Interval
e rising and falling threshold. The
rom 1 to 2^31-1.
Indicates the interval in seconds for sampling and comparing th
range is f
Variable
Indicates the particular variable to be sampled, the possible variables are:
tets:
The total number of octets received on the interface, including framing characters.
er protocol.
ors:
The number of inbound packets that contained errors preventing them from being
astPkts:
The number of broad-cast and multi-cast packets that request to transmit.
he packets are
f
InOc
InUcastPkts:
The number of uni-cast packets delivered to a higher-lay
InNUcastPkts:
The number of broad-cast and multi-cast packets delivered to a higher-layer
protocol.
InDiscards:
The number of inbound packets that are discarded even the packets are normal.
InErr
deliverable to a higher-layer protocol.
InUnknownProtos:
the number of the inbound packets that were discarded because of the
unknown or un-support protocol.
OutOctets:
The number of octets transmitted out of the interface , including framing
characters.
OutUcastPkts:
The number of uni-cast packets that request to transmit.
OutNUc
OutDiscards:
The number of outbound packets that are discarded event t
normal.
OutErrors:
The The number of outbound packets that could not be transmitted because o
errors.
OutQLen:
The length of the output packet queue (in packets).
Sample Type
lue to be compared against the
sible sample types are:
The method of sampling the selected variable and calculating the va
thresholds, pos
Absolute:
Get the sample directly.
67
Summary of Contents for GV-POE0812
Page 268: ...260...
