manualshive.com logo in svg

GeoVision GV-POE0812, User Manual

Share
Download
GeoVision GV-POE0812 User Manual Download Page 314

 

Priority 

The Priority shows the port's priority configured by the user. 

Port Status 

The Port Status shows the port's status. The status can be one of the following 
values: 

 

PoE not available - No PoE chip found - PoE not supported for the port. 

 

PoE turned OFF - PoE disabled : PoE is disabled by user. 

 

PoE turned OFF - Power budget exceeded - The total requested or used 
power by the PDs exceeds the maximum power the Power Supply can deliver, 
and port(s) with the lowest priority is/are powered down. 

 

No PD detected - No PD detected for the port. 

 

PoE turned OFF - PD overload - The PD has requested or used more power 

d OFF - PD is off. 

king correctly. 

than the port can deliver, and is powered down. 

 

PoE turne

 

Invalid PD - PD detected, but is not wor

Buttons 

 

Auto-refresh:

 Check this box to refresh the page automatically. Automatic 

refresh occurs every 3 seconds. 

 

Refresh:

 Click to refresh the page.   

 

 
 

 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 

 

306 

Summary of Contents for GV-POE0812









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands