Priority
The Priority represents the ports priority. There are three levels of power priority
named Low, High and Critical.
The priority is used in the case where the remote devices requires more power
than the power supply can deliver. In this case the port with the lowest priority will
be turn off starting from the port with the highest port number.
Maximum Power
The Maximum Power value contains a numerical value that indicates the
maximum power in watts that can be delivered to a remote device.
The maximum allowed value is 30 W.
PD Alive IP Address
Here you can input the network device’s IP address connected to a specific port.
The system will try to ping (using the IP address input here) and get a reply from
the network device 5 times in a 3 minute interval. If the system isn’t getting any
replies from the network device, that PoE port will be turned off and turned back
on (power cycle).
Buttons
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously
saved values.
Note:
If a PD is connected to the PoE switch and the PoE budget is not
enough for that PD, the PoE LED will be blinking and provides no power
to the newly connected PD.
160
Summary of Contents for GV-POE0812
Page 268: ...260...
